FAQ

• Thermal shaping process

  All polyester fiber networks in defeng, Hebei province will undergo two stereotypes, so describe our thermal shaping process. 1.We work at a constant temperature of 30 +-1 degrees Celsius and a temperature of 50-60 %We strictly control room temperature according to the process requirements. The t

  FAQ July 04, 2019
• Plug Process

  The purpose of interpolation is to turn the chip network into an interface or an unprovoked interface for customers to install and use

  FAQ July 09, 2019
• Measures to Address the Effect of Sludge Dehydration

  1. In order to ensure not only the dehydration effect of sludge, but also to control the ratio of sludge to dry sludge within a reasonable range, we should master the amount of sludge discharged from the concentration tank and a sedimentation tank and the time of sludge removal. The careful operatio

  FAQ July 30, 2019
• Factors affecting the effect of sludge dehydration

  Effects of Sludge Types and Mixtures on Dehydration Effect of SludgeThe type of sludge and the mixing ratio of sludge will directly affect the dehydration effect of sludge and the cost of sludge treatment. Generally, in actual operation, the initial sludge and residual sludge are usually mixed and t

  FAQ July 25, 2019