Views:1 Author:Site Editor Publish Time: 2020-01-14 Origin:Site
conveyor should be responsible for the operation of a person. Carry out routine maintenance and repair after each shift:
1. Check whether the fasteners are loose.
2.The rubber scraper of each sweeper and material guide groove should be adjusted when it is worn. If the wear is serious, it should be replaced.
3. When several conveyors or other equipments are running jointly, attention should be paid to the sequence of starting and stopping: no-load starting should be kept;.
4. After stopping, clean up the dirt on the conveyor and turn off the power.
5. If the device has been out of use for a long time, it should be checked before starting if there is any foreign matter on the device that affects the movement of moving parts.