Defeng Polyester Fabrics
The luricating oil of the decelerating motor should be changed regularly according to its Operation Manual.2. The roller bearings and bearings every six months once a cleaning, and re-filled lithium-based Grease ZL-2. 3. The screw of tensioning device is coated with lithium base grease zy-2 every 3
2020-01-16conveyor should be responsible for the operation of a person. Carry out routine maintenance and repair after each shift: 1. Check whether the fasteners are loose. 2.The rubber scraper of each sweeper and material guide groove should be adjusted when it is worn. If the wear is serious, it should be r
2020-01-14Troubleshooting of Filter Press 1. Conveyor belt skidding, the reason is the conveyor belt tension or driving drum surface sticky materials or moisture. The tension screw should be screwed to increase the tension. Clean the driving drum and increase the cleaning force of the empty section sweeper.2.
2020-01-09filter cake needs to be washed, there are open flow one-way washing and two-way washing, underflow one-way washing and two-way washing. 1. open-flow one-way washing is, wash liquid from the thrust plate wash liquid into the hole in turn, through the filter cloth and then through the filter cake, fro
2020-01-07a filter cloth on both sides. The base plate of the diaphragm plate is covered with rubber diaphragm on both sides, the outside of the diaphragm is covered with filter cloth, the side plate is the ordinary filter plate. When the material enters each filter chamber from the feed hole on the thrust pl
2019-12-26To incomplete statistics, China's printing and dyeing wastewater discharge accounts for about 40% of the total industrial wastewater discharge, reaching 4106-5106 M3 / D, and discharges more than 950 million tons of wastewater every year The printing and dyeing wastewater is a kind of industrial was
2019-12-05Mine dressing mud water pressure filter equipment coal mud centralized treatment equipment advantages: The whole machine frame adopts high strength steel welding structure. High strength and stable structure, enough to support the strong pressure caused by filter press feed long service life. Filte
2019-11-28polyester forming fabrics
2019-11-19(1) adjust the air pressure to set the tension of the filter cloth. During the pre-adjustment, pay attention that the tension telescopic frame can not touch the frame .(2) move the filter cloth offset sensing device slightly by hand Check if the cylinder will work properly. In addition, test whether
2019-11-14Since the filter press itself is of the same specification, the different filtration accuracy, speed, etc. required for different filtering objects are all achieved by using different filter filter cloth, also known as filter filter bag, and each filter filter. The filter board is wrapped with a fil
2019-11-05Home | Wood-Based Panels belt | Products | Application | FAQ | News&Media | Video | About | Contact | Polyester Fabrics